Rifle and Pistol Brass
| |
[ Home ] [ Up ] [ Beretta Shotgun Barrels 2 ] [ Beretta Choke Tubes ] [ Beretta Shotgun Stocks ]
Beretta Shotgun Barrels
TJ General
Store offers the full line of Beretta replacement shotgun barrels for most
models of Beretta shotguns. Shotgun barrels are available in blue or camo
finishes. We stock shotgun barrels for Urika, Xtrema, Xtrema 2,Teknys, A400,
391, 390, and more. Beretta barrels are available in standard and Optima Bore
variations.
.jpg)
All the barrels on this page are Beretta Factory Replacement
Shotgun Barrels with Beretta part numbers and made by Beretta.
They are all new-in-the-box, first quality, direct from Beretta.
All the barrels have an original factory finish to match your
receivers when they were new and have the same factory luster of
new shotguns. All the barrels carry the Beretta warranty and
quality guarantee. We are proud to be an authorized Beretta
Shotgun Barrel dealer and look forward to serving your shooting
needs.
Beretta Factory Replacement
Shotgun Barrels
No gunsmithing or special fitting required. Simply install on your receiver.
Shotgun Scope Bases from Beretta
This base allows the installation of a scope to your AL319/A391 shotgun. Weaver
interface. Fits A391 Xtrema, AL391 Urika & Teknys, AL390, A390, A304 and
A303 Beretta shotguns with dovetail on receiver. Base clamps to dovetail on
shotgun and provides a Weaver-Style rail for mounting optics. This base will
accept any Weaver-Style Ring.
| Order
Number |
SKU |
Description |
Price |
|
| C61275 |
082442801599 |
Scope Base for Fits A391
Xtrema, AL391 Urika & Teknys, AL390, A390, A304 and A303 Beretta.
Standard Blue |
89 |
|
| E00337 |
082442760179 |
Scope Base for Fits A391
Xtrema, AL391 Urika & Teknys, AL390, A390, A304 and A303 Beretta.
Realtree Hardwoods |
119 |
|
|
Order Number |
Description |
Price |
|
|
C89208 |
Xtrema 1 Trigger Group,
LEFT HAND, 12 ga.
New-in-the-box Inventory Overstock |
99 |
|
A400 Factory Replacement
Shotgun Barrels
|
Order Number |
Description |
Price |
|
|
JB400BF26 |
Beretta A400 Replacement
Shotgun Barrel, 12/26/HP Matte, Field , 3-1/2 inch chamber, |
834 |
|
|
JB400BF28 |
Beretta A400 Replacement Shotgun Barrel,
12/28/HP Matte, Field , 3-1/2 inch chamber, |
834 |
|
|
JB400BF30 |
Beretta A400 Replacement Shotgun Barrel,
12/30/HP Matte, Field, 3-1/2 inch chamber, |
834 |
|
|
JB400X26 |
Beretta A400 Replacement Shotgun Barrel,
Xplor Light, 12/30/HP Matte, Field, Over Bore, 2-2/4 and 3 Inch Only |
834 |
|
|
JB400X28 |
Beretta A400 Replacement Shotgun Barrel,
Xplor Light, 12/30/HP Matte, Field, Over Bore, 2-2/4 and 3 Inch Only |
834 |
|
Urika Field Factory Replacement Shotgun Barrels
| Urika and Urika 2 accept
the same barrels |
| For the 391 Urika and
Teknys shotguns we now offer 2 variations of
slug barrels, both feature
a matte black finish. Part JB3919224 is a 12 ga. / 24"
barrel configured with a smooth bore, fixed
cylinder choke and is supplied with rifled sights that
are drift adjustable for windage. This is a direct
replacement and re-uses you same fore-end.
Part JB39124RS is a 12 ga. / 24" barrel configured
with a fully rifled bore, a twist rate of 1 turn in 28
inches and cantilever scope mount. This barrel is a
direct replacement for all 391 Urika / Teknys
equipped with Optima Barrels, if you are installing this
slug barrel in place of a standard Mobilchoke barrel you
will also need to replace the fore-end with an Optima
type fore-end.
| The Optima fore-end part numbers
are: C83043 for Urika wood
C83044 for Urika Gold wood
C83071 for Teknys X-Tra wood
C83069 for Teknys Gold wood
C83090 for Black synthetic
C83074 for Advantage Wetlands
synthetic
C83393 for Realtree Hardwood
synthetic
C83394 for Hardwoods HD Green
synthetic
C83475 for Advantage MAX-4
synthetic |
|
|
|
|
|
JB39124RS
| Order
Number |
SKU |
Description |
Shotgun
Model |
Price |
|
| JB39124RS |
77834-1 |
12GA – 24”RIFLED Barrel |
Urika Field – Matte
Cantilever Scope Mount12ga. Fully Rifled, Cantilever
Scope Mount, Slug Barrel, 24", 3" Chamber, Matte Finish.
Fits on AL391 Urika and Teknys OptimaBore shotguns without any
adjustment, for the standard Urika & Teknys, the OptimaBore forend is
needed. Barrel comes with handy, foam lined storage/carrying case
|
299 |
|
| JB3911026 |
80092-9 |
12GA – 26” Barrel |
Urika Field – Blued ¼” x ¼” |
427 |
|
| JB3911030 |
80094-3 |
12GA – 30” Barrel |
Urika Field – Blued ¼” x ¼” |
427 |
|
| JB3911030 |
80095-0 |
12GA – 24” Barrel |
Urika Field – Matte ¼” x ¼” |
427 |
|
| JB3911524 |
80095-0 |
12GA – 24” Barrel |
Urika Field – Matte ¼” x ¼” |
427 |
|
| JB3911526 |
80096-7 |
12GA – 26” Barrel |
Urika Field – Matte ¼” x ¼” |
427 |
|
| JB3911528 |
80097-4 |
12GA – 28” Barrel |
Urika Field – Matte ¼” x ¼” |
427 |
|
| JB3911530 |
80098-1 |
12GA – 30” Barrel |
Urika Field – Matte ¼” x ¼” |
427 |
|
| JB3911824 |
80099-8 |
12GA – 24” Barrel |
Urika Field – Realtree Hardwoods
HD ¼” x ¼” |
463 |
|
| JB3911828 |
80100-1 |
12GA – 28” Barrel |
Urika Field – Advantage Wetlands
¼” x ¼” |
463 |
|
| JB3919224 |
80101-8 |
12GA – 24” Barrel |
Urika Field – Matte –Slug
(Cylinder) Rifle Sights |
426 |
|
1/4" x 1/4" is the ventilated rib size
|
JB3912024 |
80102-5 |
20GA – 24” Barrel |
Urika Field – Blued ¼” x ¼”
|
426 |
|
|
JB3912026 |
80103-2 |
20GA – 26” Barrel |
Urika Field – Blued ¼” x ¼”
|
426 |
|
|
JB3912028 |
80104-9 |
20GA – 28” Barrel |
Urika Field – Blued ¼” x ¼”
|
426 |
|
1/4" x 1/4" is the ventilated rib size
Urika Competition Factory
Replacement Shotgun Barrels See Chart Above
| Urika and Urika 2 accept
the same barrels |
No gunsmithing or special fitting required. Simply install on your receiver.
| Order Number |
SKU |
Barrel |
Shotgun |
Rib Size |
Price |
|
| JB3917428 |
80105-6 |
12GA – 28” Barrel |
Urika Competition –Blued |
3/8” x 5/16” |
457 |
|
| JB3917430 |
80106-3 |
12GA – 30” Barrel |
Urika Competition –Blued |
3/8” x 5/16” |
457 |
|
| JB3915730 |
80107-0 |
12GA – 30” Barrel |
Urika Competition –Blued |
– Stepped 3/8” x 5/16” |
457 |
|
| JB3915732 |
80108-7 |
12GA – 32” Barrel |
Urika Competition –Blued |
– Stepped 3/8” x 5/16” |
457 |
|
| JB3917128 |
80109-4 |
12GA – 28” Barrel |
Urika Competition –Blued |
– Stepped 3/8” x 5/16” |
457 |
|
| JB3917130 |
80110-0 |
12GA – 30” Barrel |
Urika Competition –Blued |
– Stepped 3/8” x 5/16” |
457 |
|
| JB3918228 |
80111-7 |
20GA – 28” Barrel |
Urika Competition –Blued |
5/16” x 5/16” |
457 |
|
| JB3918230 |
80112-4 |
20GA – 30” Barrel |
Urika Competition –Blued |
5/16” x 5/16” |
457 |
|
| Urika and Urika 2 accept
the same barrels |
Urika & Teknys Optima Bore -
Field Factory Replacement Shotgun Barrels
The barrel will be marked OB on the left side of the barrel
if its
overbored . All overboard barrels have lengthened forcing cones An
over
bored barrel is 1mm larger in diameter than a non-overbored barrel. Overbored
barrels are designated as OB or Optima Bore.
Standard 12 ga bore diameter is .724" for Beretta shotguns.
OB barrels have a bore diameter of .731" to .733" to improve patterns.
No gunsmithing or special fitting required. Simply install on your receiver.
| Order Number |
SKU |
Guage/Length |
|
|
Price |
|
| JB3913026V |
75696-7 |
12GA – 26” Barrel |
AL391 Teknys / Urika |
OPTIMA BORE PLUS Flat Rib –Truglo Bead |
457 |
|
| JB3913028V |
75697-4 |
12GA – 28” Barrel |
AL391 Teknys / Urika |
OPTIMA BORE PLUS Flat Rib –Truglo Bead |
450 |
|
| JB3911526V |
75698-1 |
12GA – 26” Barrel |
AL391 Urika Synthetic |
OPTIMA BORE PLUS Flat Rib – Metal Bead |
450 |
|
| JB3911528V |
75699-8 |
12GA – 28” Barrel |
AL391 Urika Synthetic |
OPTIMA BORE PLUS Flat Rib – Metal Bead |
450 |
|
| JB3911828V |
75700-1 |
12GA – 28” Barrel |
AL391 Urika MAX-4 HD |
OPTIMA BORE PLUS Flat Rib – Metal Bead |
457 |
|
| JB3911726V |
75701-8 |
12GA – 26”Barrel |
AL391 Urika Hardwoods HD |
OPTIMA BORE PLUS Flat Rib – Metal Bead |
457 |
|
| Urika and Urika 2 accept
the same barrels |
Urika
& Teknys Optima Bore – Competition Factory Replacement Shotgun Barrel
No gunsmithing or special fitting required. Simply install on your receiver.
| JB3917628V |
75685-1 |
12GA – 28” Barrel |
AL391 Urika / Teknys –Sporting – OPTIMA BORE Removable
Flat Rib –Truglo Bead |
477 |
|
| JB3917630V |
75686-8 |
12GA – 30” Barrel |
AL391 Urika / Teknys –Sporting – OPTIMA BORE Removable
Flat Rib –Truglo Bead |
477 |
|
| JB3915630V |
75687-5 |
12GA – 30” Barrel |
AL391 Urika / Teknys –Trap – OPTIMA BORE Removable Step
Rib –Truglo Bead |
497 |
|
| JB3915632V |
75688-2 |
12GA – 32” Barrel |
AL391 Urika / Teknys –Trap – OPTIMA BORE Removable Step
Rib –Truglo Bead |
497 |
|
| JB3918428 |
75689-9 |
20GA – 28” Barrel |
AL391 Urika / Teknys –Sporting , MC Truglo
Bead |
497 |
|
| JB3918430 |
75690-5 |
20GA – 30” Barrel |
AL391 Urika / Teknys –Sporting MC,–Truglo Bead |
497 |
|
| JB3917428V |
75691-2 |
12GA – 28” Barrel |
AL391 Urika / Teknys –Sporting – OPTIMA BORE Flat Rib
–Truglo Bead |
457 |
|
| JB3917430V |
75692-9 |
12GA – 30” Barrel |
AL391 Urika / Teknys, Sporting, Optima Bore, Flat Rib
–Truglo Bead |
457 |
|
| JB3915728V |
75694-3 |
12GA – 28” Barrel |
AL391 Urika / Teknys Trap and RL/SL, Optima Bore, Step
Rib, Metal Bead |
457 |
|
| JB3915730V |
75695-0 |
12GA – 30” Barrel |
AL391 Urika / Teknys Trap and RL/SL, Optima Bore, Step
Rib, Metal Bead |
457 |
|
Xtrema 2 Factory Replacement
Shotgun Barrels
Also fit Xtrema 1
No gunsmithing or special fitting required. Simply install on your receiver.
The Xtrema II barrels have a
channel cut into the top of the barrel tang for the new trigger system.
Xtrema II barrels work on both Xtrema and Xtrema II models but the original
Xtrema barrels will not work on the newer guns since they do not have the
channel cut into them. This is why we will only sell Xtrema II barrels
moving forward.
| Order Number |
SKU |
Description |
|
Price |
|
|
JB391X2B26
|
55556-0
|
12GA – 26” Barrel
|
Xtrema 2 Matte ¼” x ¼” ,3.5", OB, MT |
688 |
|
|
JB391X2B28
|
55557-7
|
12GA – 28” Barrel
|
Xtrema 2 Matte ¼” x ¼” ,3.5", OB, MT |
688 |
|
| JB391X2M24 |
55558-4 |
12GA – 24” Barrel |
Xtrema 2 - Realtree Hardwoods HD ¼” x ¼” |
625 |
|
|
JB391X2M26
|
55559-1 |
12GA – 26” Barrel
|
Xtrema 2 - Realtree Hardwoods HD ¼” x ¼” |
650 |
|
|
JB391X2H26
|
55560-7 |
12GA – 26” Barrel
|
Xtrema 2 - AdvantageMAX-4 HD ¼” x ¼” 3.5", OB, M4 |
625 |
|
|
JB391X2H28
|
55561-4 |
12GA – 28” Barrel
|
Xtrema 2 - AdvantageMAX-4 HD ¼” x ¼” 3.5", OB, M4
|
699 |
|
|
JB391X224RS
|
59647-1
|
12GA – 24–RIFLED Barrel
|
Xtrema 2 - Matte, Cantilever Scope Mount |
729 |
|
| JB391X2P26 |
|
12GA – 26” Barrel |
Xtrema 2 , 12/26, OB AP |
672 |
|
1/4" x 1/4" is the ventilated rib size
ES100 & 3901 Factory
Replacement Shotgun Barrels
No gunsmithing or special fitting required. Simply install on your receiver.
Note that 390 Barrels fit the 3901 and vice versa.
| Order
Number |
SKU |
Barrel |
|
Price |
|
|
JB39059 |
06144-3
|
12GA – 24” Barrel
|
3901 / 390 3” MC
|
370 |
|
|
JB39035 |
09208-9
|
12GA – 26” Barrel
|
3901 / 390 3” SK
|
370 |
|
|
JB3906528 |
09111-2
|
12GA – 28” Barrel
|
3901 / 390 3” SK
|
370 |
|
| JB390126M |
|
12GA – 26” Barrel |
A390 12/26/3" MC3, Matte |
365 |
|
|
JB390224M |
55594-2
|
20GA – 24” Barrel
|
3901
/ 390 3” MC3 Matte
INVENTORY REDUCTION SALE..
Prices too low to advertise...email for pricing...subject to stock on
hand
office@tjgeneralstore.com
|
|
|
|
JB390G28F2
|
59654-9
|
20GA – 28” Barrel
|
3901 / 390 3” MC
|
370 |
|
|
JB390M26S2
|
59655-6
|
20GA – 26” Barrel
|
3901 / 390 3” MC Youth |
370 |
|
| JB30242 |
|
12GA - 22" Barrel |
302 12/22 Slug smooth bore, Rifle Sights,
INVENTORY REDUCTION SALE..
Prices too low to advertise...email for pricing...subject to stock on
hand
office@tjgeneralstore.com
|
|
|
SK = Skeet, MC = Mobile Choke, M =
Modified, IC = Improved Cylinder, F = Full, LF = Light Full,
LM = Light Modified, XFull = Extra Full, C
= Cylinder, SK USA = Skeet USA, Fully Rifled = Rifling full length, Slug =
Smooth Bore
Text and images courtesy of Beretta
| |
=======================
Buy Five AR-15 Mags
Get One More Free
..................................
|
