Without a doubt the 1911 is a top choice as a personal defense weapon or for building the latest race guns, but not many people really understand how this locked breech single action auto works. We constantly hear from seasoned gunsmiths who, after watching this Armorer's course, admit "gee..., I didn't know that". Wonder why after you have added that latest trick gadget, your .45 isn't quite as reliable as it use to be? Invest a few minutes learning about feed ramp design, lock-up, loose breech and extractor fit. Then use Bob's simple techniques to tune your .45 for maximum reliability and performance. As in all AGI Armorer's Courses, you will see the inner workings of the .45 clearly demonstrated with a cutaway gun, as well as complete disassembly, cleaning, lubrication and reassembly, down to the last part. In addition numerous special repairs and a frank evaluation of popular accessories are also included. This course is a "must have" and is applicable to all makes, models and calibers of the 1911 ".45 Auto."

One of the worlds most widely produced and utilized military pistols the Browning Hi-Power was John Browning's improvement on his famous .45 Auto design. The Hi-power features a cam locking system that is currently used in one form or another on most modern centerfire auto pistols today. Robert Dunlap demonstrates how this pistol works internally using a cutaway model, where every part is available for you to clearly see. Also covered are: Complete disassembly, assembly, trouble shooting, necessary spare parts and repairs. Instructed by Master Gunsmith Robert Dunlap.

Master Gunsmith Robert Dunlap uses a rare Original Factory Cutaway pistol to reveal the intricate inner works of this revolutionary pistol design. The total disassembly and reassembly of this pistol can be intimidating. AGI shows you how step by step. This course is applicable to all models of the Glock even the new compact models 26 & 27. In addition to proper maintenance techniques you will also learn how to make this great pistol even more reliable.
 

In this course learn about the fascinating history and development of the S&W revolver and the differences between the J, K, L and N frame models. Clearly see and understand the inner workings of these revolvers. You will learn how to check the cylinder stop timing, straighten a bent frame, examine the fit of the double action sear and repair a broken firing pin. Assembly and disassembly along with complete basic smooth and tune is demonstrated step by step. Packed with 2 hours of fascinating information applicable to all models of S&W revolvers.
 

The design and internal function of Beretta and it's clone the Taurus PT-92 are clearly demonstrated with a cutaway pistol. Recently adopted as the standard issue side arm for the US Army, the Beretta uses a cam lock breech system that differs substantially from the old war-horse 1911 .45 Auto. Complete disassembly and reassembly is covered along with how to correct problems that are common to this pistol. Instructed by Master Gunsmith Robert Dunlap.
 

In 1949 Bill Ruger introduced a low cost but highly reliable 22 LR auto pistol. Over one million of these very successful pistols in a number of variations and model designations have been produced. These pistols, while very reliable, can be for the novice, very difficult to reassemble. AGI will teach you the correct method, step by step. Feeding and extraction problems along with corrections and repairs are shown in detail using a cutaway pistol.

An extensive review of the differences between first, second and third generation auto pistols. Using a cutaway gun Master Gunsmith Robert Dunlap explains completely the design, function, disassembly, assembly and repair of S&W centerfire auto pistols. Learn feeding and extraction corrections, sight removal and re-installation, fitting magazines and so much more!
 

The last handgun designed for the Czechoslovakian military is also one of the best pistols ever made. Designed from the start to be sold commercially and for export this is one of the most successful European handguns ever. It is used in IPSC and other matches, comes in several calibers, and has hundreds of aftermarket parts available. Here's your chance to get the information you need about one of the most popular handgun designs ever built. Follow along with Master Gunsmith Bob Dunlap as he shows in detail the design and function using an Original Factory Cutaway and demonstrates a detailed disassembly and reassembly. Bob will talk about what the usual problems are with these guns, show you what to look for, and teach you how to prevent and fix them.

Tuning The Colt S.A. For Cowboy Action Shooting & Armorer's Course Learn how to tune your Colt Single Action to work fast and flawlessly. Course covers complete design, function, disassembly, reassembly, repair and tuning. Clearly see the inner workings with rare Colt Factory Cutaway S.A. Revolver. This detailed Armorer's Course provides information that is relevant to all makes of frontier style single action revolvers. 2 hours. Instructed by Robert Dunlap.

From the rare single shot pistol manufactured at the turn of the century, to the exposed hammer H.D. Military to latest competition grade models made by the New Hi-Standard Manufacturing Company of Houston Texas, this AGI Armorer's Course covers them all in comprehensive detail. A fascinating look at one of the most successful 22LR Target pistols ever made, the Hi-Standard has a very interesting history, much of which is documented by AGI for the very first time. Other subjects covered include how to determine which method you must use to disassemble a particular model. Using the wrong method can result in permanent damage to the pistol! Also basic function and repair is covered along with trigger and safety adjustments.
 

One of the most recognizable pistols ever made, the Luger is a classic design that everyone loves and few really know. Instructor Bob Dunlap uses a rare cutaway gun to show how this intricate and unique design works. You'll learn how to completely take the pistol down and what the strengths and weaknesses of the design really are. Plus you'll get the history of the design, views of some rare models, and tips on how you can keep your Luger running for another 100 years. There have been a lot of nice Lugers available lately and whether you're a gunsmith or a collector, this two hour long video will be an interesting and valuable lesson on one of the most beautiful handguns ever produced.
 

Often described as the "poor man's Walther PPK" this solid Russian design has provided many of its owners an affordable self defense pistol. There are however numerous differences between the Walther and the Makarov which are clearly explained and demonstrated in this course. A fascinating look inside this gun using a exclusive cutaway model and amazing close up photography. You will learn what you can and can't do to improve the Makarov's reliability and trigger pull. Instructed by Master Gunsmith Robert Dunlap.
 

The cowboy in you has been waiting for this! A whole two hours on the Ruger single action designs like the Blackhawk and Vaquero. Using a rare factory cutaway gun Master Gunsmith Bob Dunlap shows the design and function of the action and then follows that up with a detailed teardown of each different model. As always, during the course of the instruction Bob will talk about what the usual problems are with these guns and show you how to prevent and fix them. Order your copy now!
 

The 9mm Sterling sub machinegun is the most reliable SMG in the world. Designed and Produced in the United Kingdom it was torture tested in trials of mud, sand and even frozen in ice. In these tests the Sterling out performed the H&K MP-5 and even the robust UZI, making it the king of the SMG’s when it comes to reliability. It was used all round the world in various wars and British territories and was discontinued only because of politics and the high cost of manufacture. In addition to being very reliable it is also extremely controllable and accurate as you will see as we fire these guns in semi and full auto. Instructed by Master Armorer John D. Bush, in these course you will learn complete disassembly down to the smallest part along with complete reassembly, trouble shooting and repairs. The mechanism of the super reliable roller follower magazine is shown along with rare factory manuals and accessories.
 

A complete course on the Taurus line of double action revolvers and their care has been a long time coming. Here in this two hour presentation you can learn the ins and outs of this popular brands major models. Join Master Gunsmith Bob Dunlap as he opens up the Taurus guns and shows the differences unique to their actions. Learn how the gun is designed to function, and what to do when something is wrong. This is a course every Taurus owner should have, and one that anyone who has even thought about owning a Taurus needs to have.
 

Say UZI and everybody knows exactly what you mean. Designed in Israel this gun is known for it’s high degree of reliability and is symbolic of the on going struggle for survival of that small nation. Named for it’s inventor, the UZI is an interestingly designed 9mm SMG with many practical features that others have since copied. You will enjoy getting to know this gun inside and out. Master Armorer John Bush demonstrates the complete design and function of the gun along with complete disassembly and reassembly down to the smallest parts. Rare accessories are shown along with trouble shooting and repair. Plus a visit to the range for some full auto fun! When you finish watching this video course, you too will be an expert on the UZI Sub Machine-Gun

If you own or work on any of these guns, then you need the information contained on these videos! Only AGI's Technical Manuals and Armorer's Courses instruct you in every aspect of maintenance and repair of your firearms. On these videos Master Gunsmith and Senior Instructor Robert "Bob" Dunlap teaches you complete disassembly and assembly (not just field stripping), parts identification, proper cleaning and lubrication. Bob also covers step-by-step instruction in design, function and repair, including: locking systems, feeding systems, sears, triggers, and stocks. AGI Armorer's Courses also include easy repairs for common problems and a FREE printable schematic when purchased in DVD format.

The American Gunsmithing Institute's instructors are all Certified Master Gunsmiths. At AGI, we adhere to the belief that you must fully understand how a firearm is designed to work before you can make any attempt to clean or repair it. AGI instructional videos provide you with this knowledge. If you own any gun, you should own the AGI Armorer's Course for that gun - order yours today.

 Understand step-by-step how the AR-15 and it's clones function including how the unique gas system works. Complete assembly and reassembly, lubrication, maintenance, feeding, trouble shooting, solutions and repairs are all explained and shown in eye-opening detail. Along with what critical spare parts are needed to keep on hand. Concludes with installation of a .22 LR conversion kit and a target shredding live fire full auto demonstration. Instructed by Robert Dunlap. (Course Does not cover Barrel Installation and Head Spacing. this is covered in Detail in Course #323 - Building the AR-15)
 

The SKS has taken the USA by storm. Fast handling, low cost and reliable, these rifles have been imported from China and Russia by the tens of thousands. Our cutaway close-ups will show you how this system inspired, but differs from the AK-47 and AKS. Due to current bans on importation, spare parts may be hard to get and fitting them requires special considerations which this course covers in detail. There are numerous accessories for the SKS, however, some (such as adding a folding stock) might make the rifle illegal! Find our how to keep yourself safe and legal. Improving the accuracy of your SKS is also covered.

The Automat-Kalashinikov (AK-47) is without a doubt the most prolific rife ever produced. Over 50 million of these "assault rifles" have been manufactured in Russia, Bulgaria, China, Egypt, Yugoslavia, and other countries combined. Tens of thousands of the semi-auto variant have been sold in the USA, including the MAK-90, NHM-91, SA-93, Maadi, Valmets as well as others. This armorer's course will explain in detail why this design is so rugged and how to insure continued reliability. Close-ups are shown of all the internal parts using a cutaway gun and complete step by step assembly/disassembly is demonstrated. Numerous simple repairs are explained and a list of critical spare parts presented. Instructed by Master Gunsmith Rober Dunlap. Applicable to all makes and models.

Over a Million 10/22 owners can't be wrong! This IS a great little rifle and we will teach you how to get the most out of your 10/22. Includes complete disassembly, reassembly, step-by-step design and function, and tricks to insure that you keep your gun performing at it's best. The inner working of the clever rotary magazine are revealed along with how to disassemble and clean it. Customize your rifle as we examine and demonstrate a number of accessories, including heavy target barrels, muzzle brakes, exotic magazines, custom stocks and a rare demonstration of a 10/22 "Gattling Gun" Kit. 81 minutes.
 

With the feel of a M1 carbine and the punch a of .223 this rifle has become popular with hunters, ranchers and police. Surprisingly it shares a number features with the M1 Garand, such as the trigger system which is clearly shown in video close-ups. You will learn how to diagnose and correct reoccurring problems. Along with complete disassembly, reassembly and maintenance. Numerous accessories available for the Mini-14 are shown and demonstrated. Instructed by Master Gunsmith Robert Dunlap.
 

The FAL rifle has been often called the "Right Arm of Freedom" as it has been in service with over 35 countries around the world. In this new & exclusive AGI Armorer's course you will learn how-to: distinguish a metric pattern FAL from an inch, properly install a barrel and adjust head space, build a rifle from a receiver and a parts kit, totally disassemble and reassemble every part in your FAL, check parts for excessive wear and adjust the gas system. You will see many of the accessories currently available on the market, some rare tools, and a live fire demonstration of a pair of custom Mini full-auto FAL's.
 

Today the M1 is enjoying a resurgence as a long range match rifle through the DCM program and the recent availability of imported surplus rifles. If you own a M1 Garand or it's magazine fed brother the M1A you'll want this course so that you can truly understand how your rifle functions, be able to totally strip it and reassemble it down to the last part and perform basic repairs. You will even understand how that mysterious clip feed system works and how to adjust it. Improving accuracy is also discussed. The differences and similarities internally between the M1 and the M1A are shown in detail. Instructed by Robert Dunlap.
 

This "War Baby" was developed during the height of WWII as it became rapidly apparent that there was a need for a lightweight rifle for officers and support troops. The M1 Carbine is based on a design by "Carbine Williams". It was rushed into production in record time and millions were produced. This course will explain and show you in detail the differences between the M1 and it's selective-fire brother the M2. A complete break down of the firearm is performed, showing the proper use of several special tools. Step by step function of the M1 is demonstrated along with a clear explanation of how the trigger mechanism works, which is the basis of many other modern designs. This handy rifle has become a favorite

Whether you have Dad's or Granddad's old Winchester or a new one purchased this year, after taking this course you will be able to clean and repair that old "94" and use it or give it to your son or daughter. Applicable to all models and variations of Winchester lever actions. AGI will take you inside the 94 and let you see how it works and what to do to maintain and repair it.
 

The Belt-fed Browning 1919 A-4 was the U.S. Military’s light machine gun for decades and it can still be found in use around the world. Master Armorer John Bush will teach you how this gun works step by step, along with complete disassembly, reassembly, trouble shooting and repairs. You will also see many rare accessories, tools, belt-loading machines, and a number of different caliber conversions including 8mm & .308. We also take you on a trip to the range where you will see how to properly set up the gun on a tripod, and field adjust headspace, as well as close-up views of several different guns firing cloth and link belts. This exhaustive course is over 3 hours in length and covers EVERYTHING in detail.

Typical of fine German engineering, the unique roller lock and fluted chamber system on the HK series of rifles provides excellent reliability and performance. For the first time ever, AGI gives you a look inside this rifle and clearly explains how the roller lock system works. A detailed demonstration of disassembly is given along with identification of two specific parts that should never be removed. Some rare US variants are shown along with a number of hard to find accessories including the .22 LR conversion kit. Applicable to H&K 91, 93 and 94 (MP5).

For over 60 years boys have been filling their dreams with Marlin's little lever action Model 39 and its successors. These are the world's most popular .22 lever actions and there are millions of them around. Until now there just wasn't any information available to the average owner on how to care for and improve these guns. Instructor Bob Dunlap shows everyone how to completely strip the gun down, put it back together, and what to look for in the process. Now you can learn what each part is supposed to do, and how this great design has been the basis of one of the best guns ever made. Get a copy of this course now, you'll be glad you did

Millions of hunters and gun enthusiasts from the 1870's to today have enjoyed the accuracy, reliability, and strength of the Marlin rifles in the 336 line. Join Bob Dunlap as he shows the advantages of this strong, side ejecting action and the features that have sold over one million of these rifles. Using cutaways and drawings Bob will show how the pieces all work together, and then discuss the repair and prevention of minor problems seen by gunsmiths. Whether you're hunting deer or shooting a match, this course will help you to keep your long gun in top notch condition.

With over 4 million of these inexpensive little .22�s out there, this is your chance to really get ahead. These rifles were sold under several different names, and even through department stores like Sears and Montgomery Wards. This course is applicable to all models. Those of us who have owned one of these neat little rifles know they are great for accuracy and reliability, but when they do go bad it's hard to find someone who knows how to fix them. Well, here�s your chance to learn what it takes to keep your gun up and running or simply ways to repair the ones you picked up cheap. Join Master Gunsmith Bob Dunlap for two hours of instruction on the design and function of one of the best selling guns of our time. As always Bob uses a custom cutaway and shows complete disassembly of the gun, and gives tips on what repairs are common and how to fix them yourself. Not only is it fun and informative, but you�ll be able to take advantage of some of the best deals in the gun market today.

Join Master Gunsmith Robert "Bob" Dunlap as he shows you all the ins and outs of the Remington 700 Rifle. Bob teaches you complete disassembly and assembly (not just field stripping!), parts identification, proper cleaning and lubrication. We give you step-by-step instruction in design, function and repair, including locking systems, feeding systems, sears, and triggers. Stocks are also covered along with easy repairs for common problems. Bob will take you inside this rifle and show you what each part is supposed to do and how to maintain and repair it.

The Thompson SMG is the classic submachinegun from which all others are judged. Often referred to as the “Chicago Typewriter” or “Gun that made the 20’s Roar” it was used by both gangsters and law enforcement officers. First developed in 1919 as a “trench broom” for WWI type fighting, only a handful of that model were built. But soon the Thompson evolved into the elegant model 1921 with the drum magazine. Then came the classic 1928 with the Cutts compensator on the muzzle. During WWII the Thompson was redesigned several times to greatly reduce the cost of manufacture. These models include the Model 1928A1, M1 and M1A1. In this video Course Master Armorer John D. Bush explains the history of the Thompson and will show you many rare manuals and prints. He then takes you inside each of the models of Thompson including the Semi-Auto 1927 A-1. You will see complete disassembly, parts identification and reassembly along with trouble shooting suggestions and repairs. You are shown how the drum magazine is loaded and you will also be treated to a heart pumping live fire demo of each of the models.

If you own or work on any of these guns or their Italian clones, then you need the information contained on this video. Includes discussion of Henry rifle. Only AGI's Technical Manuals and Armorer's Courses instruct you in every aspect of maintenance and repair of your firearms. On these videos Master Gunsmith and Senior Instructor Robert "Bob" Dunlap teaches you complete disassembly and assembly (not just field stripping), parts identification, proper cleaning and lubrication. Bob also covers step-by-step instruction in design, function and repair, including: locking systems, feeding systems, sears, triggers, and stocks. Due to the popularity of Cowboy Action Shooting their is great interest in these guns. Bob explains in no nonsense fashion how to smooth and tune these guns for CAS and save three times the price of the video in the process. AGI Armorer's Courses also include easy repairs for common problems and a FREE printable schematic when purchased in DVD format.

If you own or work on any of these guns or their Italian clones, then you need the information contained on this video. Only AGI's Technical Manuals and Armorer's Courses instruct you in every aspect of maintenance and repair of your firearms. On these videos Master Gunsmith and Senior Instructor Robert "Bob" Dunlap teaches you complete disassembly and assembly (not just field stripping), parts identification, proper cleaning and lubrication. Bob also covers step-by-step instruction in design, function and repair, including: locking systems, feeding systems, sears, triggers, and stocks. Due to the popularity of Cowboy Action Shooting their is great interest in these guns. Bob explains in no nonsense fashion how to smooth and tune these guns for CAS and save three times the price of the video in the process. AGI Armorer's Courses also include easy repairs for common problems and a FREE printable schematic when purchased in DVD format. The American Gunsmithing Institute's instructors are all Certified Master Gunsmiths. At AGI, we adhere to the belief that you must fully understand how a firearm is designed to work before you can make any attempt to clean or repair it. AGI instructional videos provide you with this knowledge.

The Remington 1100 auto loading shotgun was the first sporting firearm designed almost completely by using computer aided design (CAD) system. Relatively lightweight it employs a soft shooting gas operating system to cycle the gun. A very popular shotgun with wingshooters and trapshooters alike, this gun has some reoccurring mechanical failings. You will learn how to adjust your 1100 to prevent jamming and feeding problems. And AGI will show how the bolt locking, gas and carrier feed systems operate using a cutaway.

An excellent value for the money, the Mossberg 500 series has seen massive acceptance with sportsmen all over the world. But these shotguns do have a few problems that this course will help you to solve inexpensively. For example, you will learn how to properly repair a broken plastic trigger group (a common problem but an expensive and hard to get part). Also numerous tricks and techniques are provided to insure reliable operation. Just the assembly and cleaning portion of this video course will save you $30-40. A rare factory cutaway is used to clearly demonstrate the inner workings.

You'll find an 870 shotgun in just about every patrol car in America and hunters own about a million more. Rugged and reliable this shotgun is popular for conversion to a home defense shotgun. After watching this course you can take your 870 and repair it or tune it up for home defense, hunting or competition. Learn complete disassembly, reassembly, how to check for worn or broken parts and what parts you'll need to keep on hand. Firing pin breakage is common on this shotgun and we'll show you how to distinguish between an old style and a new style firing pin and what to do with each. Feeding can also be a problem. An explanation and demonstration of cartridge stop timing is provided using a cutaway gun.